hp printer repair near me, printer repair

 

 

 HP LASERJET FUSER ERRORS

 

Quick links:

HP Laserjet M700 Fuser Errorr 50.4F.00
HP Laserjet CM6040 Fuser Error 50.5
HP Laserjet Enterprise M600 / M602  Fuser Error 50.42.00
HP LASERJET P3505  50.9 fuser error
HP COLOR LASERJET CM4540 FUSER ERROR RESET 50.2F
HP Laserjet 1525nw 50.7 Fuser Error Message
HP Laserjet M604 50.2F.11 Fuser Error
HP Laserjet 4250 Fuser error 50.2
HP Color Laserjet 4700  50.1 Fuser error.

 

 

Fuser Error HP Laserjet Enterprise M700

Question: 
The printer fuser started to have trouble last week.  Several times i recycled power but fuser error 50.4F.00 continues.  I bought  and installed a new fuser assembly.  I'm still getting the same fuser error. I'm guessing the power supply that supports the fuser is causing the problem.  Would Anyone know which power supply controls the fuser assembly?

Response:

The 50.4F.00 error is a  drive circuit fault

1. Verify the power source. Make sure the power source meets product requirements

2. Try a different power outlet.

3. If the device was serviced previously, check the connector (J21) on the DC controller PCA.

4. If the error continues to display, then the Low Voltage power supply should be replaced. 
 

If you have any question or would like to setup a service appointment

Please call Printer Repair Experts Support Technicians Toll Free at (888) 276-4666

You can also create an online service appointment online at:

http://www.printer-repair-experts.net/online-appointment

 

 

HP Laserjet CM6040 Fuser Error 50.5

Question:
The printer produced a fuser error of 50.2 when i replaced it with a new genuine i'm now getting a fuse error 50.5.  Any suggestion?
The printer is from Korea with a 220 electrical plugged into a 220 outlet. 

Response: 
The error seems to refer to incorrect voltage part.  I would verify the fuser is a 220v fuser.  You might have a 110v. 

If you have any question or would like to setup a service appointment

Please call Printer Repair Experts Support Technicians Toll Free at (888) 276-4666

You can also create an online service appointment online at:

http://www.printer-repair-experts.net/online-appointment

HP Laserjet Enterprise M600 / M602  Fuser Error 50.42.00

Question:
I am getting error message 50.42.00 fuser error.  I have replaced the toner cartridge and the fuser and I'm still showing the error. Any suggestion? I'm at wits end with this. 

Reasoner:
Verify that the fuser was either refurbished or new fuser assembly. The error you are seeing is related to the fuser temperature.  After verifying the fuser assembly is new.  The next step is to replace the DC Controller assembly.  Unfortunately the only way to verity a parts is failing is to replace the part.  

 

If you have any question or would like to setup a service appointment

Please call Printer Repair Experts Support Technicians Toll Free at (888) 276-4666

You can also create an online service appointment online at:

http://www.printer-repair-experts.net/online-appointment
 

maintenance kit - fuser assemblies

 

HP LASERJET P3505  50.9 fuser error

Question: 

 I'm showing a fuser error 50.9 on my hp laserjet 3505 and I have followed all the steps in trouble shooting. Still no success.  Will have to take in for repair tomorrow,  but I would like to make sure I have done everything I can here before. 

Response:
Have you tried replacing the the fuser assembly?
The  error refers to replacing the fuser assembly

 

 If you have any question or would like to setup a service appointment

Please call Printer Repair Experts Support Technicians Toll Free at (888) 276-4666

You can also create an online service appointment online at:

http://www.printer-repair-experts.net/online-appointment


 

HP COLOR LASERJET CM4540 FUSER ERROR RESET 50.2F

Question:
I have Just installed a new fuser assembly on my work machine, a HP Color Laserjet CM4540

Fuser Error 50.2F, I was prompted to replace the fuser kit.

Removed and replaced fuser kit and reset page kit but am still getting the 50.2F error Low fuser temperature and fuser warm-up failure
1. Remove the fuser, and then reinstall the fuser. Make sure that there is no residual paper in the fuser. Make sure that the product is not located in front of a vent or window where cool air may interfere with the ability of the fuser to heat up.
2. Check the product power source. Make sure that the power source meets product requirements.  Make sure that this is the only device using the circuit.
3. Replace the fuser.
4. Check the connector (J50) between the printer and the fuserer. If it is defective, replace the fuser drive assembly or fuser.
5. If the error persists, replace the low-voltage power supply.
6. If this product has been previously serviced, check the connectors (J160 and J162) on the DC controller PCA and the connector (J25) on the power line between the low-voltage power supply assembly and the fuser.

 

If you have any question or would like to setup a service appointment

Please call Printer Repair Experts Support Technicians Toll Free at (888) 276-4666

You can also create an online service appointment online at:

http://www.printer-repair-experts.net/online-appointment

 

HP Laserjet 1525nw 50.7 Fuser Error Message

Question:

On a HP Laserjet 1525 what is the fuser error 50.7?

Answer
The error is related to the fuser assembly.  If a surge protector is being used, remove from printer from the surge protector.  Plug the printer directly in to the wall outlet.  Turn the printer on and if you still are experiencing the error the follow the steps below.

(1)  Turn the printer off and wait for 30 seconds.  Turn the printer back on after waiting 30 seconds.  Wait for the printer to initialize.  If the error continues to display.  follow to the next step.

(2)  Turn the device off and wait at least 25 minutes.   After wating for 25 minutes turn printer back on.  

(3)  If the error message continues to display then replace the fuser assembly.  
 

If you have any question or would like to setup a service appointment

Please call Printer Repair Experts Support Technicians Toll Free at (888) 276-4666

You can also create an online service appointment online at:

http://www.printer-repair-experts.net/online-appointment

 

 

Fuser Error

 

HP Laserjet M604 50.2F.11 Fuser Error

Question:
This is a rather new printer with only 1400 prints.  I'm getting this error 50.2F.11 Fuser error.  I turn off printer and unplug the printer and then restart again.  What else would you suggest other than replacing the fuser.  The warranty ends on November 2016.

Answer:
(1) Replace the fuser assembly if this doesn't resolve the issue then step 2
(2) Replace the power supply


If you have any question or would like to setup a service appointment

Please call Printer Repair Experts Support Technicians Toll Free at (888) 276-4666

You can also create an online service appointment online at:

http://www.printer-repair-experts.net/online-appointment


HP Laserjet 4250 Fuser error 50.2


Question: 
Good day,  My HP Laserjet 4250 is showing an error 50.2 fuser error every time I turn printer on, making it very difficult to be used.  I have already replace the fuser assembly about 2 1/2 weeks ago.  I've tried everything to get around this but failed.  Need someones help with this.

Answer:
The problem you are describing is either the fuser or power dc controller.  I would first try another fuser assembly and then if this doesn't resolve the problem then the DC Controller would need to be replaced.  


If you have any question or would like to setup a service appointment

Please call Printer Repair Experts Support Technicians Toll Free at (888) 276-4666

You can also create an online service appointment online at:

http://www.printer-repair-experts.net/online-appointment


HP Color Laserjet 4700  50.1 Fuser error.

Question:
Fuser error code 50.1 on an HP Color Laserjet 4700dn.  What should i do?

Answer:
A fuser error 50.1 is a low fuser temperature error has arose in the main thermistor.  

(1) Turn printer off and allow for time to cool down.  
(2) Remove fuser assembly and check connector (j5001) this connect fuser to the printer.  Replace connector if damaged. 
(3) Replace Fuser Assembly
(4) Inspect all connectors to and from the the DC Controller.
(5) Replace the low voltage power supply PCB.


If you have any question or would like to setup a service appointment

Please call Printer Repair Experts Support Technicians Toll Free at (888) 276-4666

You can also create an online service appointment online at:

http://www.printer-repair-experts.net/online-appointment

Contact Customer Care Representative (888) 276-4666 Toll Free

 

HP LASERJET PRINTER FUSER ERROR

HP LaserJet M604 50.2F.11 Fuser error 

Fuser Error in 3505 printer

Question:
I have a fusererror 50.9 and have followed all the steps in trouble shooting. Still no luck. Will have to take in for repair Monday, but want to make sure I have done everything I can here before. Very frustrating.

Response:
Have you replaced the fuser?  You can buy a used fuser for less than the labor you'll be charged for diagnosis.  Then the repair shop will sell you a fuser for about 40 percent more than you would pay for a new fuser if you bought it online.  If the fuser was hard to replace I'd say take it to a ship, but this one is too easy.  You can buy a working CP3505 with toner for less than the cost of a repair. (eBay).  If my post resolves your issue please click the accepted as solution button under it.  To thank a Tech for a post click the thumbs up button under the post.  You can even click both buttons.  

 

HP Laserejt MFP M475 Fuser 50.9 error

Question:
My MFP M475 is displaying "Fuser 50.9 Error".

I have followed the displayed instructions to power cycle and have disconnected from mains overnight however the problem persists. This error causes unable to use pritner.

The device warranty ended in June 2013 however the usage has been very light, still using the originally shipped toner cartridges - aproximatly used about 2000 prints in total

Response:
The problem was resolved by replacing the fuser unit.


 

© 2017 Printer-Repair-Experts.net. All Rights Reserved.  Los Angeles County, Orange County, Riverside County and San Bernardino County.
(888) 276-4666 Toll Free  |  [email protected]